We Practice The 2016 Latest Microsoft 70-417 Exam Questions And Answers

The Microsoft 70-417 Exam is an examination given by the FLYDUMPS. It is a kind of exam taken by IT professionals these days. This exam is suggested to have several years Information Technology experience. Along with this, it is vitally advisable that you research more about the exam before taking. If you got to have extra  Microsoft 70-417 resources, it is good to find Microsoft 70-417 exam sample questions. FLYDUMPS Microsoft 70-417 exam sample questions are always updated time after time. Companies offers money back assurance if you do not pass the Microsoft 70-417 exam. Majority of online Microsoft 70-417 exam sample questions has questions with the whole info along with the verified answers to orient you: http://www.flydumps.com/70-417.html

070-410 exam

QUESTION 96
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC5. DC5 has a Server Core Installation of Windows Server 2012 R2.
You need to uninstall Active Directory from DC5 manually. Which tool should you use?
A. The Remove-ADComputercmdlet
B. The ntdsutil.exe command
C. The dsamain.exe command
D. The Remove-WindowsFeaturecmdlet

Correct Answer: D Explanation
Explanation/Reference:

QUESTION 97
Your network contains an Active Directory domain named adatum.com. The domain contains three domain controllers. The domain controllers are configured as shown in the following table.

DC3 loses network connectivity due to a hardware failure.
You plan to remove DC3 from the domain.
You log on to DC3.
You need to identify which service location (SRV) records are registered by DC3.
What should you do?

A. Open the %windir%\system32\dns\backup\adatum.com.dns file.
B. Open the %windir%\system32\config\netlogon.dns file.
C. Run ipconfig /displaydns.
D. Run dcdiag /test:dns.

Correct Answer: B Explanation
Explanation/Reference:
Explanation:
Netlogon service creates a log file that contains all the locator resource records and places the log file in
the following location:

References:
QUESTION 98
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. New-StorageSubsytemVirtualDisk
B. New-VirtualDisk
C. Server Manager
D. Computer Management

Correct Answer: B Explanation
Explanation/Reference:
Explanation:
NOT A Share and Storage will only let you create a VHD on a storage pool NOT B Server Manager, can’t
find where to create this. NOT C Is this powershell ? the command should be NEW-VHD

D Computer management is the only valid yet non available answer. I’d be left with C, hoping they’d have
the good powershell command.
Note:
From @L_Ranger, Computer Management is not an option anymore.
Back to New-VirtualDisk
Old explanation : D (Computer management)
Explanation:
For Server 2012:
With the  Server Manager snap-in, you can create and attach a .VHD file directly. Figure A shows the drop-down box
where a.VHD file can be created and attached. Figure A
QUESTION 99
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
Server1 and Server2 are part of a workgroup.

On Server1 and Server2, you create a local user account named Admin1. You add the account to the local
Administrators group. On both servers, Admin1 has the same password.

You log on to Server1 as Admin1. You open Computer Management and you connect to Server2.

When you attempt to create a scheduled task, view the event logs, and manage the shared folders, you
receive Access Denied messages.
You need to ensure that you can administer Server2 remotely from Server1 by using Computer
Management. What should you configure on Server2?

A. From Local Users and Groups, modify the membership of the Remote Management Users group.
B. From Server Manager, modify the Remote Management setting.
C. From Windows Firewall, modify the Windows Management Instrumentation (WMI) firewall rule.
D. From Registry Editor, configure the LocalAccountTokenFilterPolicyresgistry value

Correct Answer: D Explanation
Explanation/Reference:
QUESTION 100
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
On a server named Server2, you perform a Server Core Installation of Windows Server 2012 R2. You join Server2 to the contoso.com domain.
You need to ensure that you can manage Server2 by using the Computer Management console on Server1.
What should you do on Server2?
A. Run sconfig.exe and configure remote management.
B. Run sconfig.exe and configure Remote Server Administration Tools (RSAT).
C. Install Windows Management Framework.
D. Install Remote Server Administration Tools (RSAT).

Correct Answer: A Explanation
Explanation/Reference:
Explanation: In Windows Server 2012, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. You must be a member of the Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode.
References:
QUESTION 101
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. 5erver2 runs Windows Server 2008 R2 Service Pack 1 (SP1) and has the DHCP Server server role installed.
You need to manage DHCP on Server2 by using the DHCP console on Server1.
What should you do first?
A. From the Microsoft Management Console on Server1, add a snap-in.
B. From Server Manager on Server2, enable Windows Remote Management.
C. From Windows PowerShell on Server2, run Enable-PSRemoting.
D. From Server Manager on Server1, install a feature.
Correct Answer: B Explanation

Explanation/Reference:
QUESTION 102
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.

You install Windows Server 2012 on VM2 by using Windows Deployment Services (WDS). You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE.
Which virtual machine setting should you configure for VM2?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization

Correct Answer: G Explanation
Explanation/Reference:
Explanation:
G. Configure the BIOS of the computer to enable PXE boot, and set the boot order so that it is booting from the network is first.
References:  Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144 Training Guide: Installing and Configuring Windows Server 2012: Chapter
7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p. 335
QUESTION 103
Your network contains an Active Directory forest. The forest contains two domains named contoso.com and corp.contoso.com. All domain controllers run Windows Server 2012 R2 and are configured as global catalog servers.
The corp.contoso.com domain contains a domain controller named DC1.
You need to disable the global catalog on DC1. What should you do?
A. From Active Directory Users and Computers, modify the properties of the DC1 computer account.
B. From Active Directory Administrative Center, modify the properties of the DC1 computer account.
C. From Active Directory Domains and Trusts, modify the properties of the corp.contoso.com domain.
D. From Active Directory Sites and Services, modify the NTDS Settings of the DC1 server object.

Correct Answer: D Explanation
Explanation/Reference:
Explanation: When you navigate your way to the Active Directory Sites and Services\Sites\SiteName\Servers then in the details pane, right-click NTDS Settings of the selected server object, and then click Properties. There will you get access to the Global Catalog check box to add the global catalog, or clear the check box to remove the global catalog.
References:

Many IT institutions offer Microsoft 70-417 Exam Certified Wireless Network Administrator study material as well as general guidance on 200-125 exam. But FLYDUMPS usually the study material obtained through these sources is too detailed and does not attract the attention of the candidates. Microsoft 070-410 exam charges for exam objectives, FLYDUMPS which goes by the product number Microsoft 70-417 in the FLYDUMPS catalog, on a per-core basis Microsoft 70-417 exam sample questions. Assuming the prices are the same even though the name has changed and the release has been revved, you can see the prices here. http://www.flydumps.com/70-417.html

Relate More Official Informations:  Exam 70-417: Upgrading Your Skills to MCSA Windows Server 2012

Article Link: http://www.microsoft-technet.com/the-updated-latest-microsoft-070-417-new-dumps-download-with-latest-exam-test-flydumps.html